ACF Reinforcement Products

The following are the reinforcement products that are distributed and installed by ACF.

High Strength Fabrics

Fortrac Geogrids

Pyramat


  HIGH STRENGTH FABRICS

Premium Reinforcement and Separation

AMOCO'S CEF 2044 was developed for the most difficult soil stabilization and reinforcement projects. Geotextile tensile strength and modulus are key properties for engineering solutions to difficult site stability problems.
  • Tensile Strength-with an ultimate wide width strength of nearly 5000 pounds per foot -approximately 400% stronger than many commonly used geogrids.
  • Very high survivability for stabilization of soft subgrades.
  • High Tensile Modulus-for reinforced embankments constructed over soft soil.

 


 

Premium Separation And Filtration

AMOCO'S CEF 2016 is designed for those demanding projects which require the best of all worlds. CEF 2016 has the tensile strength and associated physical properties to survive installation in the worst of conditions, along with the hydraulic properties critical for filtration.
  • Controlled fabric openings-constant 40 AOS (0.425 mm)-controls fine particles to prevent piping and pumping.
  • High Flow Rate-over 40 Gallons per Minute per Square Foot-permeability usually found in nonwoven fabrics.
  • High Tensile Strength and Modulus-tensile properties usually found in a geogrid.

 


PREMIUM PRODUCTS DESIGNED TO MEET

YOUR MOST DEMANDING DESIGN REQUIREMENTS

 

MINIMUM PHYSICAL PROPERTIES

Property

Test Method

Units

2044

2016

Grab Tensile

ASTM D-4632

lbs

Warp 600

Fill 500

300

Grab Elongation

ASTM D-4632

%

20

20

Wide Width Tensile Ultimate

ASTM D-4595

lbs./lin. ft.

Warp 4800

Fill 4800

Warp 2400

Fill 2400

Wide Width Tensile Elongation - Ultimate

ASTM D-4595

%

Warp 18

Fill 18

Warp 15

Fill 7

Wide Width Tensile @ 10% Elongation

ASTM D-4595

lbs./lin. ft.

Warp 3000

Fill 3000

Warp 1800

Fill 1800

Mullen Burst

ASTM D-3787

psi

1350

800

Puncture

ASTM D-4833

lbs.

140

120

Trapezoid Tear

ASTM D-4533

lbs.

300

120

UV Resistance

ASTM D-4355

%

80

80

Apparent Opening Size

ASTM D-4751

US Sieve Number

50/70

40

Permittivity ASTM D-4491

ASTM D-4491

Gal/Min/Ft² Sec¯¹

10

.15

40

.55

 

PACKAGING

Dimensions

2044

2016

Roll Width

Ft.

18

15

Roll Length

Ft.

150

300

Roll Diameter

In.

13

12

Gross Weight

Lbs.

250

250

Area

Sq. Yds.

300

500

 

APPLICATION

 

2044

2016

Reinforcement

XXXX

 

Stabilization

XXXX

XXXX

Erosion Control

 

XXXX

Silt Fence

 

 

Atlantic Construction Fabrics Inc.
1801-A Willis Road - Richmond VA 23237
.

TOLL FREE 1-800-448-3636

Top of Page Stabilization Products Back to Asphalt Products ACF Home Page